CATSCLAW Mobile


<PREVIOUS> <NEXT>

Pads:

Height: 3 inches.
Width: 10 inches.
Length: 16 inches.
Blade Pitch: 2 1/2 inches (Blade to Blade).

Materials:

Blade shaft: Stainless Steel.
Male & Female couplings: Stainless Steel.
Outer made from 1st use 80 shure hardness high grade rubber. Pads can be made in any colour using a full depth mix.
Blade carriers: Case hardened, flashed and Chromes steel.
Blades located to blade carrier using two M4 stainless steel screws in multiple teeth mesh.

Blades:

Made from case hardened, flashed and chromed steel.
Height: 2 inches.

MDU:

Height: 7 inches.
Width: 10 inches.
Length: 25 inches.

This unit contains the motor for raising and lowering the blades. There are connection points for the external battery charger and landline. Also includes an 'on' / 'off' mode selector switch, and a reset button.

An aerial socket is mounted on the top of the box for use with the remote control. Handles are attached on each side on top os the unit to assist in transportation of the equipment. A shaft runs through the MDU with a male and female connector on either side.

FM Remote Control System:

Range: 260 feet (80 metres) + in heavy traffic.

This remote control system works on a high security 'code hopping' protocol. It has a chance combination of above 16,000,000 to 1.

System can be activated by either land line control or remote transmitter.

welcome | design principle | faq's | contact | downloads | links
CATSCLAW Mobile
| CATSCLAW Military | CATSCLAW Permanent
copyright CATSCLAW International Ltd. ©1999-2004. E-mail us.